Router Bits & Sets

Kickback reducing design Individually computer balanced Precision ground for the smoothest cuts Covered by Freud's

Features: Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers. Perma-SHIELD® Non-Stick...

800.606.11 "PROFESSIONAL FINGER JOINT BIT S=1/2"" D=1-7/8x1-3/8'' RH"

855.602.11 FINGER PULL BIT  Shank Diameter=1/2'' Cutting Length= 3/4'' Radius= 3/16'' Total Length= 2-1/4''

843.063.11 SOLID CARBIDE TRIMMER BIT S=1/4'' 3/16''x1/4''x1-1/2'' RH

PRODUCT DESCRIPTION 1/2" (dia.) Double Flute Straight Bit with 1/2" shank, 4-3/8" overall length. Freud's precision ground carbide bits have a gra...

Features: Routs elegant table and furniture detail, handrail shapes, and much more. Combine with Freud 99-442, 99-444 or 99-446 (sold separately) ...

Features: 5/8-Inch Diameter, 1/2-Inch Cutting Length, 2-5/32-Inch Overall Length Anti-kickback design, Non-Stick Orange Shield Coating, Equipped w...

PRODUCT DESCRIPTION 1" (Dia.) Double Flute Straight Bit with 1/2" Shank. Freud's precision ground carbide bits have a grain size smaller than othe...

PRODUCT DESCRIPTION 1/2" (Dia.) 90° V Grooving Bit with 1/4" shank, 1-3/4" overall length. Freud's V grooving bits are designed to cut deep or shal...

880.551.11 SOLID SURFACE BEVEL BOWL BIT

816.627.11 PANEL PILOT BIT 1/2''x1-1/4''x4'' S=1/2''

891.502.11 RAIL & STILE SET

Cuts all composite materials, plywoods, hardwoods, and softwoods Use on CNC and other automatic routers as well as hand-held and table-mounted por...

PRODUCT DESCRIPTION 1/2" (dia.) Top Bearing Flush Trim Bit with 1/4" shank, 2-1/2" overall length FROM THE MANUFACTURER The top mounted bear...

PRODUCT DESCRIPTION 1/16" (Dia.) Double Flute Straight Bit with 1/4" Shank. These bits cut smoother than other straight bits because of the precise...

PRODUCT DESCRIPTION Freud 1/2"" (Dia.) Bearing Flush Trim Bit with 1/4"" Shank (44-100)", multi. The highest quality cabinets deserve the highest q...

Specs: Number of Cutters 2, Overall Dia. 1/2", Overall Length 4", Shank Dia. 1/2", Carbide Height 2" Chip free cuts on top surface of laminates an...

1-5/8" (Dia.) Chamfer Bit with 1/2" Shank Freud's precision ground carbide bits have a grain size smaller than other grades, and titanium is added...

1/2" (Dia.) Two Flute Mortise Compression Bit Key Features: Also ideal for through cuts in double sided sheets that are 5/8 In. thick or less Com...

Cuts all composition materials, plywoods, hardwoods, and softwoods Use on CNC and other automatic routers as well as hand-held and table-mounted p...

Features: Specs: Bearing Dia. 1/2", Number of Cutters 2, Overall Dia. 1/2", Overall Length 2-5/8", Shank Dia. 1/4", Carbide Height 1" Cuts all com...