CMT Orange Tools

854.509.11 BULL NOSE BIT S=1/2'' 1/2''x3-1/8''x1-3/4''

854.507.11 BULL NOSE BIT S=1/2'' 3/8''x2-7/8''x1-3/8''

Features: 0.102 kerf thickness, 0.062 plate thickness, 10Degree hook angle, 15Degree ATB grind, 2/6/32 pin hole. For crosscuts. Perfect finishing....

Features:  SP Steel Long lasting cutter performance. Details:  The 1" Tenon & Plug Cutter from CMT Tools is specifically designed for creatin...

Features:  1-1/8-Inch Diameter, 29/64-Inch Cutting Length Appropriate for many classical projects Creates a wavy profile with a bead on the top No...

Features: Made of heavy-duty steel. 1/2-Inch Shank for 1/2-Inch collets. 3-15/32-Inch overall length. Details:  Steel-made router collet extensio...

Features: Adjustable at 0. 002" increments for groove width from 13/64" to 17/32" Cut stock thickness 1/2 through 1-1/4-Inch 2 Hi-Density Carbide ...

Features: 3-35/64-Inch Overall Length, Right-Hand Rotation. 2 spurs, 2 precision ground cutting edges, long-lasting cutting performance. Drill pre...

Features:  Pair up these double fluted bits with your choice of template to produce cabinet and furniture pieces, signs, toys and any other creat...

Features: 3/4-Inch Diameter, 1-Inch Cutting Length,3-3/64-Inch Overall Length. Indispensable bit for making cabinets. Make cabinet front frames in...

Features: 4 Cutting Edges, 5-1/2-Inch Overall Length. Max suggested RPM: 500 on hardwood, 1000 on softwood. Made of alloyed steel, long-lasting cu...

Features: 7/8-Inch Cutting Length, 1/2-Inch Minor Cutting Length, 2-9/16-Inch Overall Length. Give a perfect shape for table legs and other furnit...

Features:  Machines: radial arm saws, miter saws, table saws Material: soft and hard wood Carbide tipped Anti kick-back design Low noise saw blad...

Features: For rip and crosscuts. The large gullets allow deep cuts and effective chip clearance. Cut solid wood, melamine, laminates, plywood, chi...

Features:  Machines: radial arms, miter saws, table and special saws Material: chipboard, MDF, laminate, hardwood and plywood Carbide tipped Low ...

Features: For fast extra-clean crosscuts and occasional rip as well on wood and plywood. To be used on radial arm saws, miter saws, table saws for...

Features: For fine finish crosscuts. Glass-smooth finish on your miter cuts. To be used on compound miter saws for cutting soft/hardwood, plywood ...

Features: For fine finish crosscuts. The 5° negative hook limits splintering and "climbing". Use on radial arm saws & sliding compound miter s...

Features:  Machines: radial arm saws, miter saws, table saws Material: solid wood, moldings, melamine, laminates, veneered plywood, chipboard Car...

Features: For crosscuts. Perfect finish on both sides of double-sided laminated panels with no scoring blades. To be used on radial arm saws, mite...

Features:  For rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance. Use on radial arm saws, miter saws, circular...

Features:  Machines: radial arm saws, miter saws, table saws Material: soft/hard wood, plywood Carbide tipped Low noise saw blade Plastic case fo...

Features: For heavy-duty crosscuts, perfect finishing on single-sided laminated panels. For radial arm saws, miter/table & special saws. Cut c...

Features: For fast extra-clean crosscuts and occasional rip as well on wood and plywood. To be used on radial arm saws, miter saws, table saws for...